Advantages of Spray Foam Insulation 

While almost every home nowadays plays host to a series of electronic devices. It’s not the track lighting, widescreen TVs, sound system, myriad smart phones, personal computer, microwaves, tablets, laptops, blenders, toasters, refrigerators or the security cams that are responsible for the large consumption of your home’s energy costs. It is cooling and heating. 

 Spray Foam Insulation

Insulation Options 

Nowadays, homeowners have a lot of insulation options such as: 

  1. Mineral Wool
    It is made from recycled slag and basalt. It is not really wool however, it is basically called that because the end product – that is the result of drawing and spinning molten forms of the basalt and slag – tends to resemble like a wool. Most of the forms of mineral wool pose health risks same as to fiberglass. Even though there’s no such health risk accompanied with rigid-board form of the mineral wool. 
  1. Cellulose
    Cellulose insulation is actually made from about 85 percent shredded and 15 percent recycled newspaper being a mineral compound which acts as a fire stopper. These borates or commonly termed as mineral compounds also help inhibit growth of mold and prevent the activities of pests which may otherwise want to build house in the warm shredded newspaper. 
  1. Fiberglass
    It is the most commonly used insulation in houses nowadays. It is technically very easy to install. In addition to that, it is also very affordable. Some manufacturers have undergone tentative ways to address some risks accompanied by fiberglass fibers even though these manufacturers are in the minority. 
  1. Spray Foam Insulation
    It is a form of a polyurethane which is mixed on site and then sprayed into the areas between ceiling joists, floor and wall. In order to mix these chemicals, a truck with special equipment is used to transport these components through heated hoses where they are mixed, then sprayed onto the areas to be insulated. And as soon as the combined compounds hit the surface, it starts to expand, penetrating its way into the smallest crevices prior to hardening. The following are the two forms of spray foam insulation: 
  1. Open Cell Spray Foam
    It is light but extremely effective. It expands vigorously by the time it hits the ground, leaving no crevice or crack unfilled. It is also commonly used for most home applications. 
  1. Closed Cell Spray Foam
    It is denser compared to the open cell spray foam. Upon setting, it becomes hard and has a very outstanding R-value. Closed cell forms a very effective barrier to air when set because it’s so dense. Also, it tends to build an effective moisture barrier compared to open cell. However, it can be significantly more expensive.  

Key Benefits of Spray Foam Insulation
For years, it was primarily used almost particularly in commercial settings however, today, it has changed. Homeowners are now choosing spray foam insulation CT over fiberglass and these are the reasons why: 

  • Gives a higher R-value. 
  • Will remain efficient even if it is wet because of the flood or burst pipe. 
  • Decreases the amount of pollen which infiltrates the house. 
  • Adds structural integrity to ceilings, floors and walls. 
  • Provides an effective moisture and air barrier.  





There could be a lot of advantages and disadvantages for those countries that have four seasons. Of course, they can enjoy the different weather and be able to make the fun things to satisfy their working activities. Many people would have different preferences about this. Some might have their vacation during the time that they have holidays or vacation or many due to the climate and season they have. In China, most of the students would not need to go to school during Spring vacation and summer vacation and of course they have winter vacation. In this way, students would be able to get away from stresses that these seasons bring to them. But for a lot of residents in America, they would choose fall as the best time to work for many things and vacation as well. Roof repair is the first on their list. They believe that this is the perfect time for them to know all the possible damage of the roof from the summer season and get ready for the coming winter season. Even if, there is a small problem. It would be a great deal for some as they know that this tiny reason could lead to a bigger one. It could be the cause of the headache of many house owners as they didn’t pay too much attention in it. Since, we are talking about this weather now. Let’s take a look of the things that you can do for this specific weather condition and why many people would consider this as the best time for working on your roof.  


  1. Too much heat of the sun could damage the entire surface of the roof. Of course, there are some roofs that they are built with high quality content and material. But you need to know that it would also not last for a longer time. This is a good preparation to check the state of your roof as if it is ready for the coming winter seasons. Some of the reasons of the professional and expert people working under this field. They have basic knowledge and ideas about what are the things that might damage the roof during the summer and winter time.  
  2. Aside from the one mentioned about, it is just the excellent moment to do things as it is not very hot to go there and not cold to start working for the problem. You may check the gutter and other pipes out there without the worry of direct sunlight to your skin.  
  3. Some insects and organisms and even animals would find a place to stay for the winter. So, better to check to see if there are stuff like these.  
  4. The price for the service would not be so expensive if you are planning to get one. Unlike for the winter and summer, they would raise their fee as these are the crucial time for their contractors to work. Don’t wait for the last minute before you start cleaning. You do it while you have the time fo make it.  

6 Things to Know Before Buying a Garage Door 

Garage doors make the garage secured and safe. We need it to keep our stored items safe from thieves and robbers. So it’s important that we purchase the high-end garage doors which cannot be easily compromised. You can do this by researching more about garage. So here we go, the following are the things you should know about buying a garage door.  

Garage Door 

Beware of Wood Doors 

Wood garage doors are fantastic to look at especially if they’re new, however it will take maintenance so keep its condition fresh. Over time, the natural finishes will fade and it will need new coating. If you don’t do it before it totally fades, you’ll have to sand off all the finish and apply new coating again to make the door look fresh. However, if you really want the style that wood garage door brings, you can purchase the one with a faux wood-grain finish. It looks like real wood, with stability and durability of plastics.  

Upgrade Insulation 

Before you purchase a garage door with insulation, invest on upgrading the garage’s existing insulation. The effectiveness of a garage door when it comes to insulation is R-value. When you upgrade from 2-in polystyrene to Intellicore, the insulation value raised from R-9 to R-18. You would really save a lot of money from that.  

Buy a New Opener 

When the garage door is being installed, you should also invest in a new door opener and have it installed by the contractor. Your old door opener will fail overtime, so if it’s already aging or if you want an upgrade, you can have it replaced by professionals of garage door repair in Buford GA. Installing a new one together with the new door will save money, because you can negotiate a deal on both the opener and door.  

Invest on Beefier Springs 

The springs are your garage door’s components that help the door come down slowly or go up easily when you operate it. The most common spring used for garage door is the coiled torsion spring which has about 10,000 cycles. Sounds like a lot right? But if you always open and close your garage door daily, you will reach those cycles in about 4 years. Invest on beefier springs which have 20,000 cycles. It will save you more money from future spring repair or replacement.  

Choosing the Door Design 

You’re not going to spend more time guessing on the garage door design that looks good on your house. Manufacturers of the garage doors have software on their sites that will help you find the bests style for you. Just upload your garage’s photo. They will give you the style, design, features and colors that suit your garage. You can also choose the styles and match it with your garage until you find the one that you really like.  

Choose the Windows Wisely 

The windows are also important components of your garage; you might even surprise yourself how your garage looks with it. Aside from the style, windows will supply light to the tips. So when you choose one, make sure that the garage is updated to insulated glass. If you want more security and privacy, install the windows in the top panel.  


DIY Air Conditioner Repair

Spending on ac repair by calling a professional would be very costly. Although, there will be times wherein the repair would be so grave that you would be obliged to call a professional to fix the problem. However, there are some small troubleshooting steps you may do before calling a professional. Sometimes, the problem is not as bad as you think and could be easily dealt. Usually, your aircon is not working due to the simplest of problems. It will be a pain to shell out a couple of hundred dollars just to have the repairman flip a switch, and the problem would go away in an instant. Here are some tips on checking your air con to check if you do need help from a professional. These tips would surely be able to help you save money on unnecessary calls to the repair company.

Air Conditioner Repair


The first thing to do and the most important thing to check is the breaker of the aircon. This is usually one of the most common causes as to why your aircon is not working as it should. One reason as to why the breaker would not be working is because it may have been tripped. If you have other appliances on the same breaker as the air conditioner, it may cause the breaker to trip and is the reason why the appliance is not working. This is the quickest check but will save you a lot of money by not calling a repair man.

The next thing to do would be to check the thermostat. If you air conditioning unit is battery operated then more often than not it would just need a change of batteries. The temperature of the aircon should be set below room temperature. The thermostat may be on fan mode which would make the aircon not give out cold air. All the settings regarding the temperature could be changed by using the thermostat.

Also, changing the filter of the aircon must be done regularly. If the filter is not properly maintained, then it would start accumulating dirt and dust that would lead to problems with the appliance in the future. Lack of air flow can also be the cause of why the aircon is not blowing cool air. Checking the filter should be done daily to keep the aircon in tip top shape.

If your unit runs on ice, then the ice should be melted. All ice in the unit should be melted, and one way to do this is by turning off the system and turning on the fan for it to melt or you can just turn off the unit and let the ice melt on its own. Also, give the air conditioner a good cleaning every once in awhile. Clean the outside, the blades, and check for any debris inside or near the unit. Be careful when cleaning this because the insides of an aircon are fragile and one wrong move and the part would break and would result in calling a repairer. These are some of the tips to help you better take care of your air conditioner and is a form of a DIY repair.